Accueil  Plan du site  Recommander  Imprimer la page  Contactez-nous  Français  Anglais  Allemand

CATALOGUE - ROAD WORKS

In this section of the catalogue, you will find products specialized in road works.

OFFSET MULCHERS

Rotary mower for clean intermediate rows with vertical middle axis | 1,00 m

MULCHING ON THE RIGHT SIDE:

  • On rear 3-point linkage - on front 3-point linkage - On loader

MULCHING ON THE LEFT SIDE:

  • On front 3-point linkage - On telescopic loader
  • Category 1 and 2 linkage (Adaptation for loader and telescopic loader)
  • Rotor rotation speed: 1900 rpm of 50 l/min
  • Rotor: 3 foldable blades
  • Adjustable ground follow-up: Free-rotating cup and retaining spring
  • Weight: 370 kg - 360 kg (according to the models)
DMF Poly-Green | 1,20 m - 1,40 m - 1,60 m - 1,80 mPuissance nécessaire : 35 to 100 hp
  • PTO speed: 540 rpm
  • Gearbox input shaft - star-shaped shaft
  • Clevis hitch - Floating parallelogram offset system
  • Rotor equipped with B6 hammer knives
  • Enclosed steel bodywork
  • Adjustable ground follow-up: Roller with removable and waterproof rod ends
  • Steel skids (10 mm) with a bolted base plate in HARDOX (10 mm)
  • Galvanised front anti-ejection guards
  • Rear anti-ejection: Rubber flap
  • Weight: 630 kg - 655 kg - 683 kg - 708 kg
DMF Standard | 1,60 m - 1,80 - 2,00 mPuissance nécessaire : 55 to 145 hp
  • PTO speed: 540 rpm
  • Gearbox input shaft - star-shaped shaft
  • Floating clevis hitch: With parallelogram offset system
  • Rotor equipped with B1 hammer knives
  • Steel bodywork + steel protection plate
  • Adjustable ground follow-up: Roller with removable and waterproof rod ends
  • Steel skid (10 mm) with a bolted base plate in HARDOX (10 mm)
  • Galvanised front anti-ejection guards
  • Rear anti-ejection: Rubber flap
  • Weight: 920 kg - 960 kg - 1000 kg
DMF Professional Use | 1,60 m - 1,80 m - 2,00 m - 2,20 mPuissance nécessaire : 80 to 180 hp
  • PTO speed: 540 rpm
  • Gearbox input shaft - star-shaped shaft
  • Clevis hitch - Category 2 - Floating parallelogram offset system
  • Rotor equipped with B1 hammer knives
  • Steel bodywork + steel protection plate
  • Adjustable ground follow-up: Roller with removable and waterproof rod ends
  • Steel skids (10 mm) with a bolted base plate in HARDOX (10 mm)
  • Galvanised front anti-ejection guards
  • Rear anti-ejection: Rubber flap
  • Weight: 1020 kg - 1060 kg - 1104 kg - 1146 kg
DMF Professional Use + | 1,80 m - 2,00 m - 2,20 mPuissance nécessaire : 80 to 180 hp
  • MODELS WITH EXTERNAL GEARBOX
  • OFFSET GAIN + 382 mm
    (compared to the DMF Professional Use)
  • PTO speed: 540 rpm
  • Gearbox input shaft - star-shaped shaft
  • Floating clevis hitch - With parallelogram offset system
  • Rotor equipped with B1 hammer knives
  • Steel bodywork + steel protection plate
  • Adjustable ground follow-up: Roller with removable and waterproof rod ends
  • Steel skid (10 mm) with a bolted base plate in HARDOX (10 mm)
  • Galvanised front anti-ejection guards
  • Rear anti-ejection: Rubber flap
  • Weight: 1100 kg - 1140 kg - 1180 kg
ACCO-ROAD | 1,60 m - 1,80 m - 2,00 m - 2,20 mPuissance nécessaire : 70 to 180 hp
  • PTO speed: 1000 rpm
  • Gearbox input shaft - star-shaped shaft
  • Clevis hitch - With parallelogram offset system - Removable and reversible
  • Rotor equipped with B1 hammer knives
  • Steel bodywork + steel protection plate
  • Adjustable ground follow-up: Roller with removable and waterproof rod ends
  • Steel skid (10 mm) with a bolted base plate in HARDOX (10 mm)
  • Galvanised front anti-ejection guards
  • Rear anti-ejection: Rubber flap
  • Weight: 1250 kg - 1290 kg - 1330 kg - 1370 kg